New PP/PLA/cellulose composites: effect of cellulose functionalization on accelerated weathering behavior (accelerated weathering behavior of new PP/PLA/cellulose composites)

Polylactic acid (PLA) was used as partial replacement for conventional thermoplastic matrix, new composites comprising cellulose, polypropylene (PP), and PLA being realized. In order to obtain a compatible interface between cellulosic pulp and polymeric matrix, two chemical modifications of cellulose with stearoyl chloride and toluene di‐isocyanate (TDI) were performed, structural changes being evidenced by X‐ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The composite materials were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic scanning calorimetry, impact, tensile and melt rheological tests, surface tension, and dynamic vapor sorption. Because promising results for impact strength and Young modulus were recorded when replacing 15% of PP with PLA in blends of PP with the same cellulosic pulp load, the aim of our study was to assess the behavior to accelerate weathering of composites comprising PP, cellulosic pulp, and PLA. Although the slight decrease in the mechanical properties was recorded after accelerated weathering, the use of functionalized cellulose successfully prevented the deterioration of surface materials, especially for composite comprising stearoyl chloride treated cellulose pulp. Copyright © 2015 John Wiley & Sons, Ltd.     

Prediction models for the key mechanical properties of EPDM/PP blends as affected by processing parameters and their correlation with stress relaxation and phase morphologies

The optimum condition of processing parameters (mixing temperature, rotor speed, fill factor, and blend ratio) and prediction models for the best key mechanical properties of ethylene propylene diene terpolymer/polypropylene thermoplastic vulcanizates (EPDM/PP TPVs) was investigated by using the Taguchi's optimization technique and data analysis. The results reveal that all of the processing parameters affected significantly the mechanical properties of the EPDM/PP TPVs, but specifically the blend ratio contributed more than 90% in effect size on tensile strength and tension set. There were three main factors, the mixing temperature, the fill factor, and the blend ratio, influencing the elongation at break. Furthermore, the mathematic models were effective and reliable in predicting the properties of TPVs. The correlation of mechanical properties, stress relaxation, and phase morphologies of the TPVs prepared from the predicted models was also investigated. It can be summarized that the morphological structure and stress relaxation of the TPVs were strongly governed by the EPDM content in the blend ratio. That is, the higher the EPDM content, the better phase morphology having smaller size of the vulcanized EPDM particles distributed in the PP matrix and the higher rate of stress relaxation. Moreover, these two properties were then principally pushing the mechanical characteristics of the EPDM/PP TPVs. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and magnetic properties of organic multilayer films based on the layer‐by‐layer assembly

Two polymers containing pyridine rings were prepared by free‐radical polymerization and confirmed by Fourier transform infrared and ¹H NMR spectra. The preparation of four multilayer films that were obtained by self‐assembly of the polymer and the transition metal neutralized polyelectrolyte on PE substrate was described. UV–vis spectra and atomic force microscopy images were applied to characterize these films and indicate the uniform assembling process. The driving force for building up the multilayer films was identified by infrared spectroscopy to be the coordination interaction. The magnetic behavior was examined as a function of magnetic field strength at 30 kOe and as a function of temperature (5–300 K). All films display strong soft ferromagnetic properties and higher than those of the bulk materials. The magnetic results show that the layer‐by‐layer self‐assembling approach is beneficial to the ordered alignment of adjacent paramagnetic spins and induces better magnetic phenomena. Copyright © 2015 John Wiley & Sons, Ltd.     

载体表面酸碱性质对无碱水溶液中Au催化的甘油氧化反应产物选择性的调控作用

甘油(GL)是一种重要的生物平台分子,通过催化选择氧化反应将其转化为具有高附加值化学品是可持续发展化学化工的重要课题之一.以Au为催化剂的GL水相选择氧化反应可以生成甘油酸(GLA)、二羟基丙酮(DHA)、羟基丙二酸(TTA)、羟基乙酸(GCA)和乳酸(LA)等多种产物.通常,该反应需要碱(NaOH)存在时才能进行,产物往往以GLA为主(选择性40%-70%),副产物主要有GCA, TTA和草酸(OA).一般认为,可溶性碱(OH-)是通过夺取GL分子中羟基上的质子而诱发反应的.尽管在Au催化的反应体系中从未检测到有甘油醛(GLD)生成, GLD和/或DHA被认为是该反应的中间物种.本课题组前期工作表明,氧化物(TiO2, Al2O3, ZrO2, CuO等)负载的纳米Au催化剂能够在无碱(无外加OH-)水溶液中选择性催化GL氧化生成DHA(而不是GLA).因此, OH-的存在与否很可能会改变水溶液中Au催化剂上GL氧化反应的途径.本文试图回答当GL的水溶液中不存在NaOH时, Au催化剂载体的表面酸碱性质是否也会对GL氧化反应的选择性产生调控作用.我们选用Mg/Al比(x)不同的MgO-Al2O3样品为Au催化剂的载体,以尿素为沉淀剂,采用沉积沉淀法制备了相应的Au/MgO-Al2O3(x)催化剂样品.采用X射线衍射、电感耦合等离子体-原子发射光谱仪、透射电镜以及N2吸附-脱附等温线等对MgO-Al2O3(x)和/或Au/MgO-Al2O3样品的物相、元素组成、Au颗粒大小以及比表面积等进行了表征分析;采用NH3和CO2程序升温脱附(TPD)分别对MgO-Al2O3(x)载体表面的酸、碱性进行了测定. NH3-TPD和CO2-TPD结果表明,随着Mg/Al比x从0增加至4.8, MgO-Al2O3(x)的表面酸量从0.94降到0.20μmol/m2,而其表面碱量却从0.05剧增至0.80μmol/m2.因此,载体中MgO含量越多或Mg/Al比越大,其酸性越弱而碱性越强.在无碱水溶液中的催化反应结果表明, Au/MgO-Al2O3(x)上GL氧化反应的主要产物为DHA, GLA以及GCA等.随着x值(催化剂表面碱性)不断增大,产物DHA的选择性从约80%下降到10%左右,而GLA的选择性却从约4%增加至约50%.当载体为酸性最强的Al2O3(x =0)时,产物DHA的选择性为最高(80%).由此可见,载体表面的酸碱性质决定了无碱水溶液中Au催化剂上的GL氧化产物的分布. 此外,当保持Au粒子的尺寸基本不变(如3.1或6.6 nm左右),而改变载体的酸碱性质时, Au/MgO-Al2O3催化GL氧化反应的活性(TOF)可相差8-9倍.本文还通过改变Au/MgO-Al2O3样品焙烧温度,制备了表面酸碱性质相同而颗粒大小不同的三个Au/MgO-Al2O3(0.2)催化剂,考察了Au粒径对GL氧化反应选择性的影响.在这三个催化剂上, Au颗粒的平均尺寸分别为2.8,3.2和6.6 nm, GL氧化反应的产物选择性近乎相同(DHA和GLA的选择性分别为65%和15%左右),但平均尺寸为6.6 nm Au粒子的催化活性(TOF)是3.2 nm Au粒子的1.6倍,2.8 nm Au粒子的2.7倍.因此,本文建立了载体表面酸碱性质与无碱水溶液中GL氧化产物选择性之间的关系,通过改变载体表面酸碱性质实现了对无碱水溶液中Au催化剂上GL氧化反应选择性的调控.尽管载体酸碱性质和Au粒子尺寸都对Au/MgO-Al2O3催化剂的本征活性有重要影响,但载体酸碱性质的影响更显著.     

Structural,Electronic and Optical Properties of the Monoclinic α-CoV_2O_6

First-principles calculations based on density functional theory are performed to investigate the structural,electronic and optical properties of monoclinic α-Co V2O6.Firstly,the geometry structures obtained by geometry optimization are consistent with the experimental values.Then,the energy band structure is studied using both GGA and GGA+U methods.It is found that the on-site Coulomb repulsion of the Co 3d orbital plays a key role in describing the electronic properties of α-Co V2O6,and is necessary to open the energy band gap.According to the partial density of states(PDOS),significant Co–O and V–O hybridizations are observed in the valence and conduction bands,respectively.Furthermore,the Co–O and V–O bonds are found to have significant covalent characters.Below the absorption threshold ~1.9 e V,no absorption can be detected.However,there exists a strong and wide absorption band in the energy range from 1.9 to 11 e V.Such novel optical properties imply that the α-Co V2O6 may have some potential optical applications.     

Synthesis,Crystal Structure and Properties of a New Cd(Ⅱ) Complex Based on Mixed 5-Hydroxy-isophthalic Acid and 1-(1H-imidazol-4-yl)-3-(4H-tetrazol-5-yl)benzene Ligands

A new coordination polymer [Cd2(5-IPA)(HL)2(H2O)2]·4H2O(1) was prepared under hydrothermal conditions based on 5-hydroxy-isophthalic acid(5-H2IPA) with multi-N-donor ligand 1-(1H-imidazol-4-yl)-3-(4H-tetrazol-5-yl)benzene(H2L). The complex was characterized by IR spectroscopy, TGA, X-ray powder and single-crystal diffraction. It crystallizes in the monoclinic system, space group C2/c with a = 23.6291(18), b = 9.9847(8), c = 17.7244(14) ?, β = 124.6180(10)?, V = 3441.4(5) ?3, Z = 4, C28H30N12O11Cd2, Mr = 935.44, Dc = 1.805 g/cm3, μ = 1.313 mm-1, S = 1.055, F(000) = 1864, the final R = 0.049 and w R = 0.1315 for 2985 observed reflections(I 2σ(I)). The central metal Cd(II) atoms with octahedral coordination geometry are six-coordinated by three oxygen and three nitrogen atoms. The HL- ligands from the deprotonated H2 L connect Cd(II) atoms to form two-dimensional(2D) double-layer fes networks which are further pillared by 5-IPA2- ligands into a rare binodal(3, 4)-connected three-dimensional(3D) architecture with a(4·6·8)(4·62·83) fsc-3,4-C2/c topology. Solid state luminescent property and sorption property of 1 have been investigated.     

Antibacterial behaviour of quaternized poly(vinyl chloride)-g-poly(4-vinyl pyridine) graft copolymers

Amphiphilic graft copolymers consisting of poly(vinyl chloride)(PVC) main chains and poly(4-vinyl pyridine)(P4VP) side chains were synthesized via atom transfer radical polymerization(ATRP) using direct initiation of chlorine atoms. The successful synthesis of PVC-g-P4 VP graft copolymers was confirmed by Fourier transform infrared spectroscopy(FTIR) and proton nuclear magnetic resonance(1H-NMR). Transmission electron microscope(TEM) and small angle X-ray scattering(SAXS) analysis showed that PVC-g-P4 VP exhibited microphase-separated, ordered structure with 37.6 nm of domain spacing, which was not observed in neat PVC. For antibacterial applications, the tertiary nitrogen atoms of PVC-gP4 VP was quaternized using 1-bromohexane, as confirmed by FTIR measurements. Bacteria including Escherichia coli(E. coli), Staphylococcus aureus(S. aureus), Bacillus cereus(B. cereus), and Pseudomonas aeruginosa(P. aeruginosa) were completely killed in 24 h on the quaternized PVC-g-P4VP(46% grafting) surface, indicating its excellent antibacterial behavior while it showed to be cytotoxic to mammalian cell.     

Synthesis,Crystal Structure and Catalytic Properties of a 2D Cobalt(Ⅱ) Coordination Polymer Based on Mixed Ligands

A new Co(II) metal-organic coordination polymer based on flexible bis(imidazole) and aromatic dicarboxylate co-ligands, namely [Co(bix)(nph)]n(H2nph = 3-nitrophthalic acid, bix = 1,4-bis(imidazole-1-ylmethyl)benzene), has been hydrothermally synthesized and characterized by elemental analyses, TG, IR spectroscopy and single-crystal X-ray diffraction. It crystallizes in the triclinic space group P1 with a = 9.3767(14), b = 10.1451(15), c = 12.1488(17), α = 102.6450(10), β = 108.856(2), γ = 98.807(2)°, V = 1035.3(3)3, Z = 2, C22H17 Co N5O6, Mr = 506.34, Dc = 1.624 g/cm3, μ = 0.882 mm-1 and F(000) = 518. In the complex, the nph2- ligands connect neighbouring cobalt atoms to form binuclear [Co(nph)]2 subunits, which are linked by pairs of bix ligands to form a 2D honeycomb-like(6,3) network. In addition, the compound is further extended into a 3D supramolecular architecture by π···π stacking interactions. Moreover, the luminescence and catalytic properties of the complex are investigated.     

均四嗪衍生物结构、生成焓及爆轰性能的理论研究

运用DFT-w B97/6-31+G**方法对23种1,2,4,5-四嗪衍生物的几何结构、自然键轨道(NBO)和生成焓(EOF)进行研究,并在此基础上运用Kamlet-Jacobs方程估算衍生物的爆轰性能,得到其爆速在6.69~9.37 km/s之间;基于统计热力学,求得部分标题化合物在200~800 K温度范围内的热力学性质,随温度T升高,热容Cp、熵Sm及焓Hm逐渐增大。根据最小键级理论,C-R(取代基)键和N-R键可能是1,2,4,5-四嗪衍生物高温裂解的热引发键。综合分析,基团-NO2、-N3和-N=N-有助于提高四嗪衍生物的生成焓和爆轰性能,3,6-二硝基-1,2,4,5-四嗪和3,6-二偶氮基-二硝基-1,2,4,5-四嗪从能量、爆轰性能上可以作为高能量密度材料候选物。